ETIQUETAS DE PRODUCTOS CALIENTES
Codo ranurado 22,5
-Estándar: ANSI / UL 213C UL / FM
-Material: Fundición dúctil ASTM A536, 65-45-12
-Tipo: Standard radius
-Presión nominal: 300 - 500 psi
-Superficie: Pintura roja / galvanizado en caliente
-Gama de tallas: 1″ – 12″
descripción
Grooved 22.5° elbow is a 22.5-degree elbow fitting with a grooved connection structure, used to enable the pipeline system to achieve a 22.5-degree turn
Especificación
Tamaño disponible
Talla | Center to end | ||
En pulgadas | DN | mm | L(mm) |
1″ | 25 | 33.7 | 41 |
1-1/4″ | 32 | 42.4 | 45 |
1-1/2″ | 40 | 48.3 | 45 |
2″ | 50 | 60.3 | 48 |
2-1/2″ | 65 | 73.0 | 51 |
2-1/2″ | 65 | 76.1 | 51 |
3″ | 80 | 88.9 | 57 |
4″ | 100 | 114.3 | 73 |
5″ | 125 | 139.7 | 73 |
6″ | 150 | 165.1 | 79 |
6″ | 150 | 168.3 | 79 |
8″ | 200 | 219.1 | 98 |
10″ | 250 | 273.0 | 111 |
12″ | 300 | 323.9 | 124 |
aplicación
- Fine-tuning pipe routing: Suitable for scenarios requiring precise turning at small angles (e.g., densely packed chemical plants, precision instrumentation piping systems).
- Long-distance gentle curve system: Mining conveying pipelines, municipal water supply main pipelines, achieved through the combination of multiple 22.5° elbows to create smooth curved piping layouts.
- Vibration reduction and noise reduction design: Suitable for pump inlets/outlets and air compressor pipelines, where small-angle turns minimize fluid impact vibrations and noise.
- Space-constrained areas: Ideal for building interlayers and ship engine rooms, where the design minimizes space requirements for turns.
- Fire protection system upgrades: Replaces 90° elbows to retrofit aging pipelines, improving water flow efficiency without requiring significant adjustments to supports.
ventajas
1. Ultra-low resistance: The 22.5° design reduces pressure loss by 40% compared to 45° elbows, significantly reducing energy consumption.
2. Precision fit: The standard bending radius ensures consistent turning and prevents stress concentration in the pipeline.
3. Superior pressure resistance: The ductile iron (ASTM A536) structure enhances deformation resistance by 25% under 500 psi high pressure.
4. Maintenance-free design:Hot-dip galvanized coating with weather resistance ≥20 years (red paint version suitable for indoor dry environments);Grooved joints self-seal, eliminating the need for regular tightening.
5. Plug-and-play: Compatible with any brand of grooved fittings, installation time is only 1/10 of that required for welded elbows
embalaje
- Differentiated Protection:
- ≤4 inches: 20 pieces per box, sealed with PE bags + corrugated cardboard partitions, moisture-proof and rust-proof;
- >4 inches: individual wooden boxes with top and bottom lids, embedded with EPE foam molds, and suspended bends for shock absorption.
- Key Component Protection:
- Silicone rings are fitted around groove areas to prevent impact and deformation;
- Wear-resistant PET protective film is applied to the outer sides of bends.
- Smart Traceability Packaging:
- Outer box printed with installation angle diagram (22.5° mark);
- QR code linked to pressure test report, scan to verify authenticity.
- Large Item Dedicated Solution:
- 10“-12” elbows use steel frame wooden pallets with anti-slip rubber nails on the bottom;
- Single pallet load limit of 1 piece, with “center of gravity offset” warning label.
Tamaño disponible
Talla | Center to end | ||
En pulgadas | DN | mm | L(mm) |
1″ | 25 | 33.7 | 41 |
1-1/4″ | 32 | 42.4 | 45 |
1-1/2″ | 40 | 48.3 | 45 |
2″ | 50 | 60.3 | 48 |
2-1/2″ | 65 | 73.0 | 51 |
2-1/2″ | 65 | 76.1 | 51 |
3″ | 80 | 88.9 | 57 |
4″ | 100 | 114.3 | 73 |
5″ | 125 | 139.7 | 73 |
6″ | 150 | 165.1 | 79 |
6″ | 150 | 168.3 | 79 |
8″ | 200 | 219.1 | 98 |
10″ | 250 | 273.0 | 111 |
12″ | 300 | 323.9 | 124 |
- Fine-tuning pipe routing: Suitable for scenarios requiring precise turning at small angles (e.g., densely packed chemical plants, precision instrumentation piping systems).
- Long-distance gentle curve system: Mining conveying pipelines, municipal water supply main pipelines, achieved through the combination of multiple 22.5° elbows to create smooth curved piping layouts.
- Vibration reduction and noise reduction design: Suitable for pump inlets/outlets and air compressor pipelines, where small-angle turns minimize fluid impact vibrations and noise.
- Space-constrained areas: Ideal for building interlayers and ship engine rooms, where the design minimizes space requirements for turns.
- Fire protection system upgrades: Replaces 90° elbows to retrofit aging pipelines, improving water flow efficiency without requiring significant adjustments to supports.
1. Ultra-low resistance: The 22.5° design reduces pressure loss by 40% compared to 45° elbows, significantly reducing energy consumption.
2. Precision fit: The standard bending radius ensures consistent turning and prevents stress concentration in the pipeline.
3. Superior pressure resistance: The ductile iron (ASTM A536) structure enhances deformation resistance by 25% under 500 psi high pressure.
4. Maintenance-free design:Hot-dip galvanized coating with weather resistance ≥20 years (red paint version suitable for indoor dry environments);Grooved joints self-seal, eliminating the need for regular tightening.
5. Plug-and-play: Compatible with any brand of grooved fittings, installation time is only 1/10 of that required for welded elbows
- Differentiated Protection:
- ≤4 inches: 20 pieces per box, sealed with PE bags + corrugated cardboard partitions, moisture-proof and rust-proof;
- >4 inches: individual wooden boxes with top and bottom lids, embedded with EPE foam molds, and suspended bends for shock absorption.
- Key Component Protection:
- Silicone rings are fitted around groove areas to prevent impact and deformation;
- Wear-resistant PET protective film is applied to the outer sides of bends.
- Smart Traceability Packaging:
- Outer box printed with installation angle diagram (22.5° mark);
- QR code linked to pressure test report, scan to verify authenticity.
- Large Item Dedicated Solution:
- 10“-12” elbows use steel frame wooden pallets with anti-slip rubber nails on the bottom;
- Single pallet load limit of 1 piece, with “center of gravity offset” warning label.
Obtenga hoy mismo su presupuesto de tubos de acero a medida
Facilítenos los detalles de su proyecto (como aplicación, especificaciones, cantidad). Nuestro experimentado equipo le responderá con una solución a medida y un presupuesto competitivo en un plazo de 24 horas laborables.
