ETIQUETAS DE PRODUCTOS CALIENTES
Brida reductora acanalada T en estrella
-Estándar: ANSI / UL 213C FM
-Material: Fundición dúctil ASTM A536, 65-45-12
-Presión nominal: 300 - 500 psi
-Superficie: Negro / pintura roja / galvanizado en caliente
-Gama de tallas: 4”×4”×2-1/2”
descripción
Grooved reducing flange tee wye is a pipe fitting with a grooved connection structure and a flange interface at one end. It is used for the diagonal branch of reducing pipelines and scenarios where flange connection is required
Especificación
Tamaño disponible
| Talla | Centro a fin(mm) | |||
| En pulgadas | DN | mm | L1 | L2 |
| 4” × 4” × 2-1/2” | 100 × 100 × 65 | 114.3 × 114.3 × 76.1 | 96 | 134.5 |
aplicación
- Semi-weld connection: The Semi-Weld connection is utilized for the inclined branch systems that need to be connected between grooved pipes and flanged equipment, like pump and valve outlet adaptation.
- Project with space restricted: This kind of design can adapt to the requirement of pipeline bypass project, and is widely used in dense equipment, such as chemical plants and energy station pipeline room.
- System upgrade and extension: make the connection of different diameter pipes and flange interface of equipment (such as filters, flow meters) is simple, reduce the use of adapter pieces.
ventajas
1. Integrated multi-functions: single piece spigot and socket outlet with horizontal and vertical bolt holes for water main connections, conventional flanged branch connections; 45-degree reduction reducing installation complexity
2. Sealing security: Pre-set sealing groove on flange ends conforms to standard gaskets; end is re-tightened against disengagement, realizing two-way protection of high-pressure tightness.
3. Utilizing a Ductile iron material (ASTM A536) provides effective corrosion resistance, while black paint / red paint / hot-dip galvanized surface treatment can be used outdoors for extended periods.
4. Installation Benefits: No welding by groove design and pre aligned holes in the flange bolts which increase the on site work speed by more than 50%.
5. Certification proper international: ANSI/UL/FM certification, to 300-500 psi pressure maintained fire protection and industrial systems are safe to use
embalaje
- Protection of flange joint surface: Plastic cap and rust-proof film are added to the flange joints, silicone plug is used to block bolt hole to prevent distortion
- Layered reinforcement packaging: the EPS foam module is embedded in the main body, corrugated cardboard support frame is added to the inclined branch pipe section, and a whole packing layer with steel inside wooden case.
- Smart identification system: Box marked with arrow marking the flange of ↑ sign, rating and QR code.
Tamaño disponible
| Talla | Centro a fin(mm) | |||
| En pulgadas | DN | mm | L1 | L2 |
| 4” × 4” × 2-1/2” | 100 × 100 × 65 | 114.3 × 114.3 × 76.1 | 96 | 134.5 |
- Semi-weld connection: The Semi-Weld connection is utilized for the inclined branch systems that need to be connected between grooved pipes and flanged equipment, like pump and valve outlet adaptation.
- Project with space restricted: This kind of design can adapt to the requirement of pipeline bypass project, and is widely used in dense equipment, such as chemical plants and energy station pipeline room.
- System upgrade and extension: make the connection of different diameter pipes and flange interface of equipment (such as filters, flow meters) is simple, reduce the use of adapter pieces.
1. Integrated multi-functions: single piece spigot and socket outlet with horizontal and vertical bolt holes for water main connections, conventional flanged branch connections; 45-degree reduction reducing installation complexity
2. Sealing security: Pre-set sealing groove on flange ends conforms to standard gaskets; end is re-tightened against disengagement, realizing two-way protection of high-pressure tightness.
3. Utilizing a Ductile iron material (ASTM A536) provides effective corrosion resistance, while black paint / red paint / hot-dip galvanized surface treatment can be used outdoors for extended periods.
4. Installation Benefits: No welding by groove design and pre aligned holes in the flange bolts which increase the on site work speed by more than 50%.
5. Certification proper international: ANSI/UL/FM certification, to 300-500 psi pressure maintained fire protection and industrial systems are safe to use
- Protection of flange joint surface: Plastic cap and rust-proof film are added to the flange joints, silicone plug is used to block bolt hole to prevent distortion
- Layered reinforcement packaging: the EPS foam module is embedded in the main body, corrugated cardboard support frame is added to the inclined branch pipe section, and a whole packing layer with steel inside wooden case.
- Smart identification system: Box marked with arrow marking the flange of ↑ sign, rating and QR code.
Obtenga hoy mismo su presupuesto de tubos de acero a medida
Facilítenos los detalles de su proyecto (como aplicación, especificaciones, cantidad). Nuestro experimentado equipo le responderá con una solución a medida y un presupuesto competitivo en un plazo de 24 horas laborables.
