ETIQUETAS DE PRODUCTOS CALIENTES
Tapón de soldadura a tope
-Estándar: ISO
EN 10253-1 / EN 10253-2 / EN 10253-3
-Material: Acero al carbono S235 / P235TR2
Acero inoxidable equivalente a WP304 / WP316L
-Presión W: Igual a la misma tubería recta
-Superficie: Pintura negra / galvanizado en caliente
Blanco de escabeche, etc.
-Gama de tallas: 1″-24″
descripción
butt weld caps form a high-strength seal through butt welding connections, which can reliably withstand high pressure and prevent leakage.
Especificación
Tamaño disponible
| Talla | Preferido T a ES 10253-2(mm) | R(mm) | ||
| NPS | DN | OD(mm) | ||
| 1/2″ | 15 | 21.3 | 2.0/2.6/3.214.0/5.017.1 | 25 |
| 3/4″ | 20 | 26.9 | 2.3/2.6/3.214.014.5/5.6/8.0 | 25 |
| 1″ | 25 | 33.7 | 2.6/3.214.014.515.6/6.3/8.8 | 25 |
| 1-1/4″ | 32 | 42.4 | 2.6/3.6/4.0/5.0/6.3/8.0/10.0 | 38 |
| 1-1/2″ | 40 | 48.3 | 2.6/3.6/4.0/5.0/6.3/8.0/10.0 | 38 |
| 2″ | 50 | 60.3 | 2.9/3.614.0/5.6/7.1/8.8/11.0 | 38 |
| 2-1/2″ | 65 | 76.1 | 2.9/3.6/5.6/7.1/8.0/10.0/14.2 | 38 |
| 3″ | 80 | 88.9 | 3.214.0/5.6/8.0/8.8/11.0/16.0 | 51 |
| 4″ | 100 | 114.3 | 3.6/4.5/6.3/8.8/11.0/14.2/17.5 | 64 |
| 5″ | 125 | 139.7 | 4.0/5.0/6.3/10.0/12.5/16.0/20.0 | 76 |
| 6″ | 150 | 165.1/168.3 | 4.0/4.5/5.6/7.1/11.0/14.2/17.5122.2 | 89 |
| 8″ | 200 | 219.1 | 4.5/6.3/7.1/8.0/12.5/16.0/17.5122.2 | 102 |
| 10″ | 250 | 273.0 | 5.0/6.3/8.8/10.0/12.5/16.0/22.2/30.0 | 127 |
| 12″ | 300 | 323.9 | 5.6/7.1/8.8/10.0/12.5/17.5/25.0/32.0 | 152 |
| 14″ | 350 | 355.6 | 5.6/8.0/10.0/12.5/16.0/20.0/28.0/36.0 | 165 |
| 16″ | 400 | 406.4 | 6.3/8.8/10.0/12.5/17.5/22.2/30.0/40.0 | 178 |
| 18″ | 450 | 457 | 6.3/10.0/11.0/12.5/17.5/22.2/32.0/45.0 | 203 |
| 20″ | 500 | 508 | 6.3/10.0/11.0/12.5/17.5/25.0/36.0/50.0 | 229 |
| 24″ | 600 | 610 | 6.3/10.0/12.5/17.5/25.0/30.0/45.0/60.0 | 267 |
aplicación
- Used for permanent terminal closure of piping systems to achieve absolute sealing of high-pressure fluids, such as at the ends of process pipelines, equipment reserved interfaces, and system isolation sections.
- Key applications include oil platforms, chemical reaction equipment, high-pressure steam systems, and other hazardous conditions that require zero leakage.
- Used as a safety isolation component during pipeline pressure testing and system section maintenance.
ventajas
- The final sealing insurance policy: hemispherical/butterfly type + fully welded joints, quite stressing capacity rendering the straight pipe extremely hard to produce leak.
- Impact-Resistant Design: The thickened curved configuration can bear water hammer impact and pressure fluctuations, safety factor more than 3 times higher than the standard.
- Corrosion Defense Matrix: Carbon Steel: Heavy duty anti-corrosive epoxy powder coating (≥250μm) or hot-dip galvanizing 20 years weather resistanceStainless Steel: Electrolytic polishing finish(Ra≤8 μm), conforms to ASME BPE.
- Installation Revolution: single-piece welded connection replaces flange-blind flange combinations, saving 80% installation time and eliminating bolt loosening risks.
- Large Range of Sizes: 1”- 24” full range, for use with ultra-deep-walled pipe (SCH160) and special alloy systems.
embalaje
- Compression-resistant nested packaging:
- ≤10″: High-strength corrugated box + EPS molded inner liner
- 10″: Steel-reinforced wooden box + internal honeycomb aluminum support frame
- Dual-layer protective sealing:
- Inner surface: Food-grade biodegradable rust-proof paper
- Outer surface: Heat-shrink film packaging + impact-resistant corner guards
- Smart error-proofing system:
- Printed welding bevel processing guidelines on the inner side of the packaging
- Fluorescent warning tape (with “No Impact” label) affixed to the outer box
- Minimalist traceability: Laser-engraved on the inner wall of the pipe cap, combining three codes (specification/pressure rating/material batch number).
Tamaño disponible
| Talla | Preferido T a ES 10253-2(mm) | R(mm) | ||
| NPS | DN | OD(mm) | ||
| 1/2″ | 15 | 21.3 | 2.0/2.6/3.214.0/5.017.1 | 25 |
| 3/4″ | 20 | 26.9 | 2.3/2.6/3.214.014.5/5.6/8.0 | 25 |
| 1″ | 25 | 33.7 | 2.6/3.214.014.515.6/6.3/8.8 | 25 |
| 1-1/4″ | 32 | 42.4 | 2.6/3.6/4.0/5.0/6.3/8.0/10.0 | 38 |
| 1-1/2″ | 40 | 48.3 | 2.6/3.6/4.0/5.0/6.3/8.0/10.0 | 38 |
| 2″ | 50 | 60.3 | 2.9/3.614.0/5.6/7.1/8.8/11.0 | 38 |
| 2-1/2″ | 65 | 76.1 | 2.9/3.6/5.6/7.1/8.0/10.0/14.2 | 38 |
| 3″ | 80 | 88.9 | 3.214.0/5.6/8.0/8.8/11.0/16.0 | 51 |
| 4″ | 100 | 114.3 | 3.6/4.5/6.3/8.8/11.0/14.2/17.5 | 64 |
| 5″ | 125 | 139.7 | 4.0/5.0/6.3/10.0/12.5/16.0/20.0 | 76 |
| 6″ | 150 | 165.1/168.3 | 4.0/4.5/5.6/7.1/11.0/14.2/17.5122.2 | 89 |
| 8″ | 200 | 219.1 | 4.5/6.3/7.1/8.0/12.5/16.0/17.5122.2 | 102 |
| 10″ | 250 | 273.0 | 5.0/6.3/8.8/10.0/12.5/16.0/22.2/30.0 | 127 |
| 12″ | 300 | 323.9 | 5.6/7.1/8.8/10.0/12.5/17.5/25.0/32.0 | 152 |
| 14″ | 350 | 355.6 | 5.6/8.0/10.0/12.5/16.0/20.0/28.0/36.0 | 165 |
| 16″ | 400 | 406.4 | 6.3/8.8/10.0/12.5/17.5/22.2/30.0/40.0 | 178 |
| 18″ | 450 | 457 | 6.3/10.0/11.0/12.5/17.5/22.2/32.0/45.0 | 203 |
| 20″ | 500 | 508 | 6.3/10.0/11.0/12.5/17.5/25.0/36.0/50.0 | 229 |
| 24″ | 600 | 610 | 6.3/10.0/12.5/17.5/25.0/30.0/45.0/60.0 | 267 |
- Used for permanent terminal closure of piping systems to achieve absolute sealing of high-pressure fluids, such as at the ends of process pipelines, equipment reserved interfaces, and system isolation sections.
- Key applications include oil platforms, chemical reaction equipment, high-pressure steam systems, and other hazardous conditions that require zero leakage.
- Used as a safety isolation component during pipeline pressure testing and system section maintenance.
- The final sealing insurance policy: hemispherical/butterfly type + fully welded joints, quite stressing capacity rendering the straight pipe extremely hard to produce leak.
- Impact-Resistant Design: The thickened curved configuration can bear water hammer impact and pressure fluctuations, safety factor more than 3 times higher than the standard.
- Corrosion Defense Matrix: Carbon Steel: Heavy duty anti-corrosive epoxy powder coating (≥250μm) or hot-dip galvanizing 20 years weather resistanceStainless Steel: Electrolytic polishing finish(Ra≤8 μm), conforms to ASME BPE.
- Installation Revolution: single-piece welded connection replaces flange-blind flange combinations, saving 80% installation time and eliminating bolt loosening risks.
- Large Range of Sizes: 1”- 24” full range, for use with ultra-deep-walled pipe (SCH160) and special alloy systems.
- Compression-resistant nested packaging:
- ≤10″: High-strength corrugated box + EPS molded inner liner
- 10″: Steel-reinforced wooden box + internal honeycomb aluminum support frame
- Dual-layer protective sealing:
- Inner surface: Food-grade biodegradable rust-proof paper
- Outer surface: Heat-shrink film packaging + impact-resistant corner guards
- Smart error-proofing system:
- Printed welding bevel processing guidelines on the inner side of the packaging
- Fluorescent warning tape (with “No Impact” label) affixed to the outer box
- Minimalist traceability: Laser-engraved on the inner wall of the pipe cap, combining three codes (specification/pressure rating/material batch number).
Obtenga hoy mismo su presupuesto de tubos de acero a medida
Facilítenos los detalles de su proyecto (como aplicación, especificaciones, cantidad). Nuestro experimentado equipo le responderá con una solución a medida y un presupuesto competitivo en un plazo de 24 horas laborables.
